Our services
Industrial coatingCoating renewalSurface preparationOn-site coating
We coat steel parts and structures under controlled shop conditions in Dubnica nad Váhom, renew damaged coating systems, prepare surfaces by abrasive blasting in the same facility, and in justified cases coat directly on site. The appropriate approach is determined by part condition, dimensions and weight, handling method and the location where the job will actually be carried out.
Decision by situation
How to choose the approach
The approach depends on part condition, processing method and place of execution.
Abrasive blasting / surface preparation
Surface preparation before coating
The surface has corrosion, burrs or old non-adherent layers that prevent the new coating from bonding. Abrasive blasting removes corrosion, burrs and old layers; we typically degrease the surface before processing.
View Abrasive blasting / surface preparation
Technical capacity
Facility in Dubnica nad Váhom
Industrial coating takes place at the facility in Dubnica nad Váhom, where we process parts up to 15 m long, 10 t weight and 5 m high on a floor area of 1 500 m². In the same facility we also carry out in-house abrasive blasting of smaller parts — typically up to 1 500 × 1 500 × 1 500 mm and up to 250 kg in an automated booth. For larger parts we arrange external blasting by agreement, or accept parts with the surface already prepared. Outgoing inspection includes a visual check and, by agreement, dry film thickness (DFT) measurement. More about the facility is on theDubnica nad Váhom facility page.
Next step
What to send for initial assessment
A few basic details are enough for a quick technical assessment.
What to send
- part or structure type,
- approximate dimensions and weight,
- photos or drawing,
- surface condition and operating environment of the part.
Contact details are on the Contact page.
Decision and process
Frequently asked questions
Which service to choose for a new steel part?
We process new parts with industrial coating in the shop — we specify the coating system according to the operating environment. See Industrial coating.
Can only the damaged area of the coating be renewed?
That depends on the extent of damage and the condition of the substrate beneath the coating. For minor damage, local repair may be enough; for wider damage, renewing the full system is more appropriate. We assess this from photos or a site visit — see Coating renewal.
When is on-site coating appropriate?
When the part is already installed, forms part of a process unit, or transport to the shop is not practical. We assess suitability based on the specific conditions — see Mobile coating.
What details to send for assessment?
Part type, approximate dimensions and weight, photos or drawing, and surface condition. Contact details are on the Contact page.